Hanging Sleeve Corners with Quilt Label

January 03, 2023


Hanging-Sleeve-Corners-with-Quilt-Label-Heroimage copy.jpg

Making the quilt label

1. Open the software, click change hoop, click enter size and make the width and height 7” (175mm) The diagonal of the hoop is the space you have available to make your quilt label.

Hanging-Sleeve-Corners-with-Quilt-Label-step 1 choose hoop copy.jpg

2. Go to the letter tab, choose the font and size you want. Click apply.

3. Turn the lettering on the diagonal and place it in the triangle

Hanging-Sleeve-Corners-with-Quilt-Label-step 3 diagonal placement copy.jpg

4, You can add embroideries as well

Hanging-Sleeve-Corners-with-Quilt-Label-step 4 add embroideries copy.jpg

5. Finish by changing the hoop size to eg 8” x 8” (200mmx200mm) hoop
6. You can make up to four quilt labels for every quilt

Hanging-Sleeve-Corners-with-Quilt-Label-step 5 example 2 copy.jpgHanging-Sleeve-Corners-with-Quilt-Label-step 5 example1 copy.jpg


Making the sleeve corners

7. Cut out four squares 8”x8” (20x20cm)
8. If you want to make quilt labels stitch them out on the square(s)

9. Fold the squares diagonally

10. Pin a triangle in each corner, raw edges to the outer edge

Hanging-Sleeve-Corners-with-Quilt-Label-Heroimage copy.jpg
Binding the quilt

See separate instructions on How-to bind the edges with single or duble layer. You will find the instructions in the How-to-section

Hanging rod.
Measure the distance between the two corners on top of the quilt. Cut a wooden hanging rod to match the length and hang your quilt!

© mySewnet Studio